A smoothed cap model for variably saturated soils and its robust numerical implementation          下载免费PDF全文

P. Gamnitzer  G. Hofstetter 《国际地质力学数值与分析法杂志》2015,39(12):1276-1303

This paper deals with the numerical implementation of a cap model for unsaturated soils. It provides a brief review of existing cap model approaches, based on which an improved model formulated in terms of generalised effective stress and matric suction is derived and described in detail. Although the proposed model is a multisurface plasticity model, it can efficiently be implemented using only single‐surface projections because of the smoothness of the model, which is obtained by construction. Numerical algorithms are provided for these single‐surface stress projections, using a single‐equation approach whenever possible. The robustness of the utilised single‐equation approaches is enhanced by proposing problem‐fitted start‐up procedures based on investigations of the nonlinear projection equations. A comparison of the model response with extensive material test data is used to validate the model and to demonstrate the robust application of the approach to silty sands and low to medium plasticity clays. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

The effective stress concept and the evaluation of changes in pore air pressure under jacketed isotropic compression tests for dry sand based on the 2‐phase porous theory          下载免费PDF全文

Sayuri Kimoto  Fusao Oka  Yasuhiro Morimoto 《国际地质力学数值与分析法杂志》2017,41(18):1894-1907

The effective stress concept for solid‐fluid 2‐phase media was revisited in this work. In particular, the effects of the compressibility of both the pore fluid and the soil particles were studied under 3 different conditions, i.e., undrained, drained, and unjacketed conditions based on a Biot‐type theory for 2‐phase porous media. It was confirmed that Terzaghi effective stress holds at the moment when soil grains are assumed to be incompressible and when the compressibility of the pore fluid is small enough compared to that of the soil skeleton. Then, isotropic compression tests for dry sand under undrained conditions were conducted within the triaxial apparatus in which the changes in the pore air pressure could be measured. The ratio of the increment in the cell pressure to the increment in the pore air pressure, m, corresponds to the inverse of the B value by Bishop and was obtained during the step loading of the cell pressure. In addition, the m values were evaluated by comparing them with theoretically obtained values based on the solid‐fluid 2‐phase mixture theory. The experimental m values were close to the theoretical values, as they were in the range of approximately 40 to 185, depending on the cell pressure. Finally, it was found that the soil material with a highly compressible pore fluid, such as air, must be analyzed with the multi‐phase porous mixture theory. However, Terzaghi effective stress is practically applicable when the compressibilities of both the soil particles and the pore fluid are small enough compared to that of the soil skeleton.  相似文献   

Energy partitioning over a semi‐arid shrubland in northern China          下载免费PDF全文

X. Jia  T. S. Zha  J. N. Gong  B. Wu  Y. Q. Zhang  S. G. Qin  G. P. Chen  W. Feng  S. Kellomäki  H. Peltola 《水文研究》2016,30(6):972-985

During the last decade, the widely distributed shrublands in northern China have shown significant signs of recovery from desertification, the result of widespread conservation practices. However, to support the current efforts in conservation, more knowledge is needed on surface energy partitioning and its biophysical controls. Using eddy‐covariance measurements made over a semi‐arid shrubland in northwest China in 2012, we examined how surface energy‐balance components vary on diurnal and seasonal scales, and how biophysical factors control bulk surface parameters and energy exchange. Sensible heat flux (H) exceeded latent heat flux (λE) during most of the year, resulting in an annual Bowen ratio (β, i.e. H/λE) of 2.0. λE exceeded H only in mid‐summer when frequent rainfall co‐occurred with the seasonal peak in leaf area index (LAI). Evapotranspiration reached a daily maximum of 3.3 mm day^?1, and summed to 283 mm yr^?1. The evaporative fraction (EF, i.e. λE/R_n), Priestley–Taylor coefficient (α), surface conductance (g_s) and decoupling coefficient (Ω) were all positively correlated with soil water content (SWC) and LAI. The direct enhancement of λE by high vapour pressure deficit (VPD) was buffered by a concurrent suppression of g_s. The g_s played a direct role in controlling EF and α by mediating the effects of LAI, SWC and VPD. Our results highlight the importance of adaptive plant responses to water scarcity in regulating ecosystem energy partitioning, and suggest an important role for revegetation in the reversal of desertification in semi‐arid areas. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

A 3D discrete FEM iterative algorithm for solving the water pipe cooling problems of massive concrete structures          下载免费PDF全文

Jing Cheng  T. C. Li  Xiaoqing Liu  L. H. Zhao 《国际地质力学数值与分析法杂志》2016,40(4):487-508

Water pipe cooling has been widely used for the temperature control and crack prevention of massive concrete structures such as high dams. Because both under‐cooling and over‐cooling may reduce the efficiency of crack prevention, or even lead to great harm to structures, we need an accurate and robust numerical tool for the prediction of cooling effect. Here, a 3D discrete FEM Iterative Algorithm is introduced, which can simulate the concrete temperature gradient near the pipes, as well as the water temperature rising along the pipes. On the basis of the heat balance between water and concrete, the whole temperature field of the problem can be computed exactly within a few iteration steps. Providing the pipe meshing tool for building the FE model, this algorithm can take account of the water pipe distribution, the variation of water flow, water temperature, and other factors, while the traditional equivalent algorithm based on semi‐theoretical solutions can only solve problems with constant water flow and water temperature. The validation and convergence are proved by comparing the simulated results and analytical solutions of two standard second‐stage cooling problems. Then, a practical concrete block with different cooling schemes is analyzed and the influences of cooling factors are investigated. In the end, detailed guidance for pipe system optimization is provided. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Implicit integration under mixed controls of a breakage model for unsaturated crushable soils          下载免费PDF全文

Yida Zhang  Giuseppe Buscarnera 《国际地质力学数值与分析法杂志》2016,40(6):887-918

This paper discusses a series of stress point algorithms for a breakage model for unsaturated granular soils. Such model is characterized by highly nonlinear coupling terms introduced by breakage‐dependent hydro‐mechanical energy potentials. To integrate accurately and efficiently its constitutive equations, specific algorithms have been formulated using a backward Euler scheme. In particular, because implementation and verification of unsaturated soil models often require the use of mixed controls, the incorporation of various hydro‐mechanical conditions has been tackled. First, it is shown that the degree of saturation can be replaced with suction in the constitutive equations through a partial Legendre transformation of the energy potentials, thus changing the thermomechanical state variables and enabling a straightforward implementation of a different control mode. Then, to accommodate more complex control scenarios without redefining the energy potentials, a hybrid strategy has been used, combining the return mapping scheme with linearized constraints. It is shown that this linearization strategy guarantees similar levels of accuracy compared with a conventional strain–suction‐controlled implicit integration. In addition, it is shown that the use of linearized constraints offers the possibility to use the same framework to integrate a variety of control conditions (e.g., net stress and/or water‐content control). The convergence profiles indicate that both schemes preserve the advantages of implicit integration, that is, asymptotic quadratic convergence and unconditional stability. Finally, the performance of the two implicit schemes has been compared with that of an explicit algorithm with automatic sub‐stepping and error control, showing that for the selected breakage model, implicit integration leads to a significant reduction of the computational cost. Such features support the use of the proposed hybrid scheme also in other modeling contexts, especially when strongly nonlinear models have to be implemented and/or validated by using non‐standard hydro‐mechanical control conditions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Modeling 3D thermal fracture propagation by transient cooling using virtual multidimensional internal bonds          下载免费PDF全文

K. Huang  A. Ghassemi 《国际地质力学数值与分析法杂志》2016,40(17):2293-2311

Thermal fracturing can play an important role in development of unconventional petroleum and geothermal resources. Thermal fractures can result from the nonlinear deformation of the rock in response to thermal stress related to cold water injection as well as heating. Before the rock reaches the final failure stage, material softening and bulk modulus degradation can cause changes in the thermo‐mechanical properties of the solid. In order to capture this aspect of the rock fracture, a virtual multidimensional internal bond‐based thermo‐mechanical model is derived to track elastic, softening, and the failure stages of the rock in response to the temporal changes of its temperature field. The variations in thermo‐mechanical properties of the rock are derived from a nonlinear constitutive model. To represent the thermo‐mechanical behavior of pre‐existing fractures, the element partition method is employed. Using the model, numerical simulation of 3D thermal fracture propagation in brittle rock is carried out. Results of numerical simulations provide evidence of model verification and illustrate nonlinear thermal response and fracture development in rock under uniform cooling. In addition, fracture coalescence in a cluster of fractures under thermal stress is illustrated, and the process of thermal fracturing from a wellbore is captured. Results underscore the importance of thermal stress in reservoir stimulation and show the effectiveness of the model to predict 3D thermal fracturing. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

The Upper Devonian Kellwasser event recorded in a regressive sequence from inner shelf to lagoonal pond,Catalan Coastal Ranges,Spain     

《Sedimentology》2018,65(6):2055-2087

This study, conducted in the Catalan Coastal Ranges, north‐east Spain, describes the Upper Devonian Kellwasser event in a shallowing‐upward sequence of black shales, siltstones and quartz arenites. This sequence was deposited in a progradational and regressive coastal system where the sedimentary environment evolved from the inner shelf to a lagoonal pond located landward of the shoreline. Three anomalous succeeding steps have been identified by geochemical analysis. The first one, detected on the inner shelf, was characterized by oxygen depletion and high organic productivity. The second, detected in the nearshore, was caused by hydrothermal activity occurring under normal oxic conditions. The third and most intense step was identified in the muds of the lagoonal pond and has been linked to strong anoxic conditions, elevated clastic input derived from changes in the weathering regime at the source area and moderate hydrothermal activity. The Kellwasser event is thus defined in the study area as stepwise and multi‐causal. This is the first time that the Kellwasser event has been identified in a sedimentary environment behind the shoreline. It is also the first time that it has been reported in the Catalan Coastal Ranges.  相似文献   

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions          下载免费PDF全文

Xiong Zhang  Jean‐Louis Briaud 《国际地质力学数值与分析法杂志》2015,39(13):1369-1409

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

民采煤窑浅层采空区覆岩应力研究     

郝森  关雨男  王强  胡维哲  田柯 《地质论评》2024,70(S1):224-226

  相似文献   

寒区工程动荷载模型试验系统设计   总被引：1，自引：1，他引：0  

赵淑萍  马巍  焦贵德  罗飞 《冰川冻土》2011,33(4):826-832

寒区工程动荷载模型试验系统主要由模型试验槽、制冷及控温装置、动力加载装置、传感器和数据采集系统四部分组成．系统具有如下特点：能根据实际工程对长3m、宽2．5rn和高1m的模型试验土体进行低温动荷载试验;采用3组冷冻板给土体降温,降温速度快,能提供的最低温度为-20℃,而且能提供多组均匀、稳定的温度边界,冷冻板的温度波动...  相似文献